8. INSTRUCTIONS FOR USE
Always observe the safety instructions and applicable regulations.
Use only one hand to hold the tool, do not place your other hand over the air vents.
Prior to operation:
Fit the correct accessory ① for the application.
8.1. SWITCHING ON AND OFF
To switch the tool on, set the ON/OFF switch ③ to position 1 / 2 / 3. Some smoke may be
emitted after switching on; this does not indicate a problem.
To switch the tool off, set switch ③ to position ① to cool off, then set the ON/OFF switch
to position 0. Let the tool cool down before moving or storing it.
8.2. TEMPERATURE SETTING
Turn ON/OFF ③ switch to 1/ 2/ 3 depending on temperature you need. The heat gun will
start to blow warm air. Now you can increase or decrease the outlet temperature gradually by
adjusting the dial on the back of the gun.
Turn anti-clockwise to decrease, clock-wise to increase the temperature.
More LED lights turn on when the temperature increases.
8.3. STRIPPING PAINT
Fit an appropriate accessory.
Set a high air temperature.
Switch the tool on.
Direct the hot air onto the paint to be removed.
When the paint softens, scrape the paint away using a hand scraper.
Do not strip metal window frames, as the heat may be conducted onto the
glass and crack it. When stripping other window frames, use the glass
protection nozzle.
To prevent igniting the surface do not keep the tool directed at one spot
too long.
Avoid collecting paint on the scraper accessory, as it may ignite. If
necessary, carefully remove paint debris from the scraper accessory using
a knife.
8
Make sure that the tool is switched off and the nozzle has cooled down.
Dropped nozzles can set objects on fire. Nozzles must be firmly fitted and
secure on the unit.
Touching a hot nozzle can lead to serious burns. Before attaching or
replacing a nozzle allow the unit to cool down completely.
A hot nozzle can set a surface on fire. Place down hot nozzles only on
fire-proof surfaces.
An incorrect or defective nozzle can lead to heat accumulation and
damage the unit. Use only original nozzles as shown in the table.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais