Earlex ASG55 Instruções de Operação

Thank you for purchasing an Earlex Electric Airless Spray Gun.Please read all these instructions before operatingthis product and retain them for futu

10PROBLEM CAUSE ACTION REQUIREDSpray Gun hums butdoes not operatePiston sticking (4) Remove the large knob at the top of the unit. Pull Nozzleand Pist

11This unit is a Class II appliance which means it is double insulated for your protection, no earthing wireis necessary.If the supply cord is damaged

NOTES

 Keep work area clean - Cluttered areas and benchesinvite injuries. Consider work area environment - Do not expose thespray gun to rain. Do not use

1. 1.0mm Nozzle SG2092. 0.6mm Nozzle SG2113. Piston Spring 55W SG2344. Piston Assembly SG2375. Suction Tube and Filter Assembly SG2406. 1.0 Litre Pain

TO OBTAIN THE BEST RESULTS FROM YOUR SPRAY GUN READ THESE INSTRUCTIONSCAREFULLY BEFORE USE.The Spray Gun can be used to spray many different materials

5Preparation of the surface and thinning of the paint are the two most important areas to be concernedwith to obtain the best results from your Spray

6SAFETY WARNING!DO NOT SPRAY FLAMMABLE MATERIALS (FLASH POINT < 21˚C). ALWAYS SPRAY IN A WELLVENTILATED AREA. NEVER SPRAY NEAR NAKED FLAMES.ALWAYS

1) Only apply one coat at a time. If more than one coat is required follow the paint manufacturer’sinstructions for drying times.2) If spraying small

8 Rinse the Spray Gun Paint Container with thethinner that was used and spray through the SprayGun onto cardboard or newspaper. Remove the top knob,

9 Thoroughly clean all of these parts. Lightly oil thepiston and slide it in and out of the cylinder todistribute the oil over the mating parts, reas